HC-05 module is an easy to use Bluetooth SPP (Serial Port
Protocol) module, designed for transparent wireless serial connection
setup.Serial port Bluetooth module is fully qualified Bluetooth V2.0+EDR
(Enhanced Data Rate) 3Mbps Modulation with complete 2.4GHz radio
transceiver and baseband. It uses CSR Bluecore 04-External single chip
Bluetooth system with CMOS technology and with AFH(Adaptive Frequency
Hopping Feature). It has the footprint as small as 12.7mmx27mm. Hope it
will simplify your overall design/development cycle.
Hardware Description:
1. Model HC-05.
2. Use the CSR mainstream bluetooth chip, bluetooth protocol standards.
3. Module working voltage 3.3 V.
4. Potter default rate of 9600, the user can be set up.
5. The core module size : 28 mm x 15 mm x 2.35 mm.
6. Working current: matching for 30 MA, matching the communication for 8 MA.
7. Dormancy current: no dormancy.
8. Used for GPS navigation system, water and electricity gas meter reading system.
9. With computer and bluetooth bluetooth adapter, PDA, seamless connection equipment
3. Module working voltage 3.3 V.
4. Potter default rate of 9600, the user can be set up.
5. The core module size : 28 mm x 15 mm x 2.35 mm.
6. Working current: matching for 30 MA, matching the communication for 8 MA.
7. Dormancy current: no dormancy.
8. Used for GPS navigation system, water and electricity gas meter reading system.
9. With computer and bluetooth bluetooth adapter, PDA, seamless connection equipment
10.Default Baud rate: 38400, Data bits:8, Stop bit:1,Parity:No
parity, Data control: has Supported baud rate:
9600,19200,38400,57600,115200,230400,460800.
- Commercial Series: Bluetooth module board Series
- With LED indicator light, use 150mA and 3.3V regulation chip.
- With VCC.GND.TXD.RXD foot for the Bluetooth
- With “Re-seach” button(ON/OFF/WAKE foot for it , external MCU outinput “High level” can control module to re-seach)
- Compatible with bluetooth master module”.slave module”or master-slave(whole) module.
- Input voltage: 3.3~6V
- Size: 1.55cm*3.98cm
Note:
input power supply 3.3~6V, Prohibit more than 7V
No “Automatically prevent power supply peversing func”, so please correctly connect power supply
We advise to install “Bluetooth master module”
The “State” is output foot for LED status, when bluetooth “Unconnected”, output “Pulse” ; when bluetooth “connected”, output “High level”, we can determine the states from “MCU”
If only the board , No any “Bluetooth Function “
We advise to install “Bluetooth master module”
The “State” is output foot for LED status, when bluetooth “Unconnected”, output “Pulse” ; when bluetooth “connected”, output “High level”, we can determine the states from “MCU”
If only the board , No any “Bluetooth Function “
Package Included:
1 pcs x HC-05 Bluetooth module
HC-05 Bluetooth Module
- Product Code: HC-05
- Availability: In Stock
-
Rs.410